Having a hard time finding extended studs locally for my truck. I'm converting the rear to disks and with my wheels theres just not enough stud for me to be comfortable romping on it later(V8 powered). Anybody know where to get studs about a half inch longer? Or what transfers from other models.

Have you tried summit racing, or jegs?

I'm trying to find something I can get local. Like through napa or kragen.

Got mine from local auto supply!Will try to find suppliers name& part numbers!

right on dude.

Did you find a local supplier? I'm going to be doing this to but I guess I might just order from Summit. lol

i actually didnt really find anything at summit that would work either. I found one set but theyre a little too long for what I need. stock is something like 1.57" and these were like 2.7".

Her you go
Distributor/ manufacture is Dorman /part number is DOR 610-265
ITEM IS A 12mm wheel stud / 45 mm in length /knurled end is 14.27mm ,with a 10mm shoulder
The stock stud is 37 mm in length
This is for my 88 2wd Extra cab /5 lug
If not finding @ your auto store,try to find their site on line!
Hope this helps

thanks

those arent any longer than my factory studs.

As I stated in my post my truck is a 2wd 88,5 lug,stock studs are 37mm long,I needed a 1/4 " longer & that's what I bought(45mm)!
That supplier will have what you need,measure,what is your stock length? Call them!

same as those. 44.5mm. it's an 8 inch rear not a 7.5 so thats probably why theres a difference. From looking up parts it looks like most all toyotas share the same knurl diameter? I could see why they'd do that, but its never that simple.

yeah I'm having zero luck finding anything even aftermarket.