91 toyota longbed (Black Widow)

krazedprof · **Joined:** Thu Aug 19, 2010 9:55 am **Posts:** 71

so i figured id post some info on my project. it is a 91 reg cab longbed currently in the process of finishing bodydroppping it and motor swap.
list of mods thats going to be happening.......
phantom grille with 88-89 dual chevy pickup headlights behind it
01 tacoma front bumper
full tilt front end on bags
tilt bed on bags
69 charger tail lights
sliding ragtop
18's
custom interior, seats from a 96 tacoma and a center console from 05 taurus
full sheet metal dash
302 with c4 tranny with b&m quicksilver shifter with custom knob
trans am shaker scoop
custom steering wheel
tilt column from a 4runner
wipers shaved
doors shaved and antennae

cable · **Posted:** Fri Aug 20, 2010 8:41 pm

Nice project man,the tilt frontend will be interesting!what kind of headers are you running? Mustang shorties?

krazedprof · **Joined:** Thu Aug 19, 2010 9:55 am **Posts:** 71

cable wrote:

Nice project man,the tilt frontend will be interesting!what kind of headers are you running? Mustang shorties?

yeah i bought them off ebay i just hope i can find someone that will be able to do something with the passengers side header since its really close to the block

cable · **Posted:** Fri Aug 20, 2010 11:58 pm

Hmm...it looks like there\'s plenty of room,might be close to the starter & the framerail though.I\'ve still got manifolds for now.I\'m not sure there\'s room for the shorties,but I don\'t have any laying around to try ethier,lol.I hope they fit man,because that\'s my plan to,lol!

burnzya · **Posted:** Fri Aug 20, 2010 11:59 pm

she's lookin good josh!

krazedprof · **Joined:** Thu Aug 19, 2010 9:55 am **Posts:** 71

so test fitted the motor and guess what the headers wont work damn. had to take the stabilizer bar out too i dont think it will hurt anything do you? and now my idea for tilt front isnt happening either so im just gonna cut a hole in the hood and put a scoop on it heres some pics oh also test fitted the the 02 bumper and i like how it looks.

Bump · **Joined:** Wed Jan 07, 2009 9:43 am **Posts:** 256

id try to keep that stabilizer bar in there.....

cable · **Posted:** Mon Aug 23, 2010 1:59 am

yep put that stabilizer bar back in,and slap a mustang dual sump oil pan on it,works perfectly! you'll have to get a mustang oil pick up tube also,that sucks those headers don't fit,I wasn't sure if they would or not,you got a pic of where there hitting?they hit the frame rails right?

krazedprof · **Joined:** Thu Aug 19, 2010 9:55 am **Posts:** 71

cable- do u have pics of your setup? and how far is your motor from the firewall and yeah the headers hit the frame rails

cable · **Posted:** Mon Aug 23, 2010 8:30 pm

I will post up my progress soon,Ive almost got the mounts made,Ive been taking my time and taking lots of pics,lol.the valve covers are at the firewall,it needs to be as far back as possible to make room for a radiator,Ive got stock truck manifolds,they ae very close to the block.i\'ll try to update my thread tonight!

krazedprof · **Joined:** Thu Aug 19, 2010 9:55 am **Posts:** 71

cable wrote:

I will post up my progress soon,Ive almost got the mounts made,Ive been taking my time and taking lots of pics,lol.the valve covers are at the firewall,it needs to be as far back as possible to make room for a radiator,Ive got stock truck manifolds,they ae very close to the block.i\'ll try to update my thread tonight!

ok cool, also was goin to ask if your motor sits lower than the hood or are you going to put a cal hood or ?

MacDave06 · **Posted:** Tue Aug 24, 2010 12:18 am

If you're having trouble with getting the radiator to fit right, you can always move the radiator forward rather than moving the motor back. It's a little work but I notched my front crossmember and built a brace that goes out in front of the support and cut out the center of the core support. I'm using an lt1 so the water pump has no pulley but I dont think its really any shorter than a short sbc pump. I'm able to run a 16" zirgo fan and I still have clearance

krazedprof · **Joined:** Thu Aug 19, 2010 9:55 am **Posts:** 71

yeah im going to look into some things and i will pick up a dual sump pan and tube

krazedprof · **Joined:** Thu Aug 19, 2010 9:55 am **Posts:** 71

so got my cando's the other day and installed the uppers today still need to install the lowers also picked up an oil pan need to clean up b4 i put it on though heres some pics for ya

VegasYota94 · **Posted:** Sun Aug 29, 2010 7:38 pm

Looks good, love that bumper

Threads		Author	Replies	Views	Last post
Related topics
	1991 toyota p/u	flyinmonkes	5	563	Fri Apr 27, 2012 1:14 am loegle
	91 toyota longbed (Black Widow) [ Go to page: 1, 2, 3, 4 ]	krazedprof	58	3097	Sat Oct 08, 2011 8:28 pm krazedprof
	my 42" toyota project	burnzya	11	1356	Tue May 08, 2012 9:18 pm brdypers
	84 Toyota single cab short bed [ Go to page: 1, 2 ]	nevadajh	22	2439	Sun Nov 07, 2010 10:45 pm nevadajh
	Sunset Joe's 85 Toyota [ Go to page: 1 ... 4, 5, 6 ]	Twisted Minis	76	4508	Wed Aug 12, 2009 3:23 am xtotalanarcoix
	Toyota Clip w/ Billet Wheels	Cold_Carcass	12	621	Wed Dec 24, 2008 10:49 am CajunTaco
	72 toyota hilux for sale or trade	waynehammer	13	1661	Fri Sep 26, 2008 12:25 am speedster93b
	81 toyota old school longbed mini [ Go to page: 1, 2, 3, 4 ]	megaglow_z	55	3837	Wed Feb 29, 2012 4:15 pm lolux83uk
	1982 Toyota Pickup [ Go to page: 1 ... 7, 8, 9 ]	dirtbiker	129	18279	Mon Oct 01, 2007 8:47 pm dirtbiker
	my 97 toyota	nathan04low	7	1411	Mon Jul 16, 2007 3:29 am aussie trucker

♦ 91 toyota longbed (Black Widow)

Who is online

Members currently in chat

Last Updated Threads
In Projects / Under Construction » not-so-sleeper last post by: MacDave06 05/23/2012 03:15am In Buy, Sell, Trade and Internet Deals » Cell Phone Recycling The Business People last post by: sagesam 05/17/2012 03:13am In New Members » just scooped it up. last post by: 87bbucket 05/13/2012 09:42pm In Do It Yourself Projects by Members » bagged taco....having trouble with tow and steering last post by: I8NT2LO 05/13/2012 01:01am In Projects / Under Construction » backhalf last post by: stll2hi 05/12/2012 09:09pm In Buy, Sell, Trade and Internet Deals » Phone maintenance last post by: sagesam 05/11/2012 02:52am In Projects / Under Construction » my 42" toyota project last post by: brdypers 05/08/2012 10:18pm In General Discussion » What size bolts fit. last post by: brdypers 05/08/2012 10:14pm In Buy, Sell, Trade and Internet Deals » this is a kind of important tattoo supplies last post by: loegle 05/07/2012 05:39am In New Members » New to Ohio And Kinda new to Toyota last post by: loegle 05/07/2012 04:45am
view all