cant i just take all the lines off and just run it with nothing in it?
lol

you can but it sux balls

y does it suck balls?

If your gettin rid of the AC throw a york on that bitch. It'll be the best thing you do!

unlike some people on here, i cant afford that shit, so its gotta be the cheap way..

No it cant be dry you will wear out the box like a rear end with no lube, even manuel boxes have fluid and it has to be checked and changed as well

ill figure something out...couldnt i just put fluid in it and cap the ends off? lol
ill find some hoses to do it.. should have much pressure going through it anymore since the pump is gone and not hooked up.

you cant cap the ends off cause the fluid will have no where to go and it will be real hard to turn the easiest and the cheapest is to take the 2 compression fittings off your old lines and make a new line to loop them but you will need an adaptor cause iirc one of the fittings is going to be smaller so you could reduce them to the smae size or put the adaptor on it to go to the larger size

ok.. ill have to look into that.. never made lines b4.. hard lines that is...
not to expensive eh?

no I dont know what size the lines are off the top of my head but you can but a 3/8 6in section of brake line for like 5 bucks or so and then just get your fittings like 2 a piece and make a u out of the line and thread it in to the box it should be done for under 20

awesome.. will try that this weekend.